Export certification for blenders is not a single global checklist. The exact requirement depends on the target market, the product structure, the food-contact parts, and the electrical safety route chosen by the manufacturer. For most export programs, buyers should review product safety certification, food-contact compliance, environmental compliance, and supporting test documentation together rather than treating them as separate items. KANGJIA presents itself as a small home appliance manufacturer with in-house injection, hardware, assembly, and motor workshops, plus its own R&D department and testing room. Its official site also states that its products have passed GS, CE, CB, LFGB, RoHS, and REACH related certifications, which is an important starting point when evaluating export readiness for blender projects.

CE Is Commonly Required For Blender Entry Into The EU

For the European market, CE marking is one of the most important requirements because it shows the product is declared to comply with applicable EU legislation. For electrical kitchen appliances such as blenders, this usually means reviewing the Low Voltage Directive and other relevant EU rules before shipment. The European Commission’s Low Voltage Directive page explains that harmonised standards are published under Directive 2014/35/EU, which is one of the key legal routes used for household electrical products entering the EU market. In practical sourcing terms, this means CE is not just a logo on the carton. It depends on technical documentation, conformity assessment, and product design aligned with the right standards.

CB Helps Support Multi-Market Approval

CB is often one of the most useful certifications for blender exporters because it supports international recognition of test results across many markets. While CB alone is not always the final market access approval, it can make market-entry preparation more efficient when the same blender platform is being adapted for different countries. KANGJIA publicly lists CB among its product certifications, which is valuable for OEM and ODM programs that may later expand into multiple regions instead of staying in one market only. For buyers building a project sourcing checklist, CB is often a strong sign that the factory is preparing products for broader export use rather than only for domestic sales.

GS Can Strengthen Safety Positioning In German-Speaking Markets

GS is widely recognized as a voluntary German safety mark and is often used to strengthen product credibility in German-speaking and wider European import programs. It is not a substitute for CE, but it can add confidence in product safety testing and market acceptance for certain channels. KANGJIA lists GS among its stated certifications, which supports its positioning as an export-oriented appliance manufacturer rather than a supplier focused only on price. For blender projects, this can be especially useful when buyers want stronger safety positioning alongside the mandatory EU legal framework.

LFGB Matters For Food-Contact Blender Parts

Because blender jars, lids, seals, and blade-adjacent parts come into contact with food, food-contact compliance is a major export consideration. KANGJIA lists LFGB among its certifications, and its published blender-related content repeatedly connects food-grade materials with export-facing product development. In Europe, food-contact materials are governed by Regulation EC No 1935/2004, which sets the general principles of safety and inertness. That makes LFGB-related positioning especially relevant for blender products, since buyers need to review not only electrical safety but also the compliance of every food-contact component in the product path.

RoHS And REACH Are Important For Environmental Compliance

Blenders exported to many markets, especially Europe, also need environmental compliance review. KANGJIA states that its products have passed RoHS and REACH related certifications. RoHS matters because it restricts hazardous substances in electrical and electronic equipment, while REACH is closely tied to chemical substance control across materials and components. In practical manufacturing terms, these requirements influence material sourcing, supplier declarations, testing strategy, and documentation management. For buyers comparing a manufacturer with a trader, this is one area where a factory with in-house process control usually has a stronger advantage.

IEC 60335-2-14 Is A Core Safety Standard Behind Blender Certification

Behind many export certifications, one of the most important technical standards for blenders is IEC 60335-2-14:2025. The IEC states that this standard covers the safety of electric kitchen machines for household and similar purposes with rated voltage not more than 250 V, and blenders are explicitly listed within its scope. This standard is important because it shapes how manufacturers test and document safety for export programs. In other words, certifications such as CE, GS, and CB are not just commercial paperwork. They are built on actual product design and testing against recognized safety requirements.

US Programs Also Require Attention To Food-Contact And Electrical Compliance

For the United States, buyers should not assume the same route used for Europe applies without change. Food-contact materials used in blender parts may require FDA-authorized status before they are marketed for that intended use. FDA guidance explains that a food contact substance that is a food additive must be authorized before marketing in the US, usually through the food contact notification route. On the appliance side, KANGJIA’s published nutrient blender article also references ETL among its certifications, which is relevant because importers often review recognized electrical safety pathways in addition to food-contact compliance when planning the US market.

Typical Certification Review For Blender Export Projects

Final View

The export certifications required for blenders usually include a combination of electrical safety, food-contact, and environmental compliance items rather than one single certificate. For many programs, CE, CB, GS, LFGB, RoHS, and REACH are among the most important checkpoints, while US-focused projects also need careful review of food-contact authorization and market-specific electrical compliance planning. Based on KANGJIA’s public information, the company shows several advantages for export blender development: integrated factory control, its own testing support, active OEM and ODM capability, and a certification profile already aligned with common international market requirements.